[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3098.0. "HW 4.0A for OSF/1 3.2C?" by CSC32::J_SOBECKI (John Sobecki, DTN 592-4101, CXO3-2/D2) Mon Dec 25 1995 10:59

    Hello,
    
    I had a customer try and install Hubwatch 4.0A on his OSF/1 system.  I
    had him install from the plain 4.0 CD and it worked fine.  Is the 4.0A
    a MUP/patch kit for 4.0?  
    
    I know that 4.1 is released, but he just got the 4.0 CDs.
    
    I can't locate any information on Hubwatch 4.0A in this conference.
                                                             
    Any info would be appreciated.
    
    Thanks,
    John Sobecki
    CSC/Colorado
T.RTitleUserPersonal
Name		DateLines
3098.1Stick with 4.0NETCAD::FORINOWed Dec 27 1995 09:4113
    The only 4.0 HUBwatch kit that went out on OSF/1 was 4.0.1 at the
    time of release.  No maintenance kits ever went out for 4.0 as far
    as I am aware.  I believe the banner on the copyright window displays
    the full version number.
    
    I'm not sure what 4.0A is.  I know there has been a recent change in 
    version numbering where the new scheme is two digits followed by a 
    letter.  I wondering if 4.0.1 became 4.0A because of this but I did
    not think this is retroactive for earlier kits.
    
    I would just stay with your running 4.0 kit.
    
    							John
3098.2NETCAD::CURRIERThu Dec 28 1995 12:433
    4.0A = 4.0.1   
    labels only support one decimal therefore the introduction of alphas