[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3095.0. "Apps disabled flag not reset after visit of Gigaswtch" by DELNI::LICAUSE () Thu Dec 21 1995 12:54

    We have noticed that under V4.1.1 in the Digital UNIX version of
    HUBwatch, when one either starts HUBwatch to a Gigaswitch or sets
    the community to a Gigaswitch, both the FIND ADDRESS and FIND
    DUPLICATES under the APPLICATIONS menu bar are disabled (grayed out).
    
    Ok for Gigaswitch, but these apps are not be reset (reenabled) when
    one then goes to a hub. You must exit hubwatch and reenter to reset
    this flag.
    
    Is this a known problem?
    
    Thanks,
    Al
T.RTitleUserPersonal
Name		DateLines
3095.1NETCAD::DRAGONTue Jan 02 1996 16:298
    
    Al,
    
    	Thanks for pointing this out. We'll look into it.
    
    Regards,
    Bob