| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Hi,
One customer has defined on one DECHUB900 with a repeater that
supports per-port switching and some groups.
An on another hub900 has the same one repeater that supports
per-port switching and defined some groups.
This two hub900 are connected on the same lan. The question is
if you may make that one group of one hub900 belong to the same
group that the another hub900.
It's workgroup between two differents hubs.
Thanks for any information.
Elsa Soengas
MCS Spain
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3087.1 | VLAN possibilities. | CGOS01::DMARLOWE | Have you been HUBbed lately? | Tue Dec 19 1995 12:55 | 28 |
You can create groups in the 900TP and it doesn't matter whether the
module is in a chasis or a ONEHUB. If for example you create 3 groups
in one 900TP and 3 groups in a second 900TP, add an extra RJ45 in each
group. The extra RJ45 can be used to interconnect the groups between
the 2 portswitch modules via UTP.
900TP Group #
PC 1---:
PC 2---+
PC 3---+-----> 1
-5---:
|
------------------------------> UTP to group 1 in second 900TP
PC 6---:
PC 9---+
PC 10---+------> 2
PC 30---+
-31---:
|
--------------------------------> UTP to group 2 in second 900TP
The only remaining issue is whether the VLANs need to be interconnected
to allow the users to communicate. If yes then a DECswitch 900EE/EF
in one chasis could accomplish this task.
dave
| |||||