[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3085.0. "console problem" by DEKVC::YOUNGCHANKIM () Tue Dec 19 1995 04:01

    I was read note file 458.x already.
    
    I have just gotten a Packetprobe 90.  I plugged in the power and
    connected it to the local thinwire ethernet.  The DC OK light is on.
    (I have been tried HUB900 also)
    Next I plugged in a DB9 connector (H8571-J) and connected a VT382.  I
    depressed RETURN twice (as stated in the Users Guide) and got nothing. 
    I tried 300/1200/2400/9600.
    In HUBwatch,this module displayed and twice click,error message is
    can not find NSMAN.EXE

    LED status:
    #1 on
    #2 off
    #3 off (in DH900, thinwire or UTP)
    #4 off

    Any ideas as to what is happening?

    yckim
T.RTitleUserPersonal
Name		DateLines
3085.1Is PROBEwatch installed???FOUNDR::SKABOExpect Nothing U never disappointedTue Dec 19 1995 09:2915
    Hello Yckim,
    	
    >>> In HUBwatch,this module displayed and twice click,error message is
    >>> can not find NSMAN.EXE
    
    Do you have PROBEwatch installed? You do not say what operating system,
    but for DOS, HUBwatch is looking for NSMAN.EXE:
    
    		c:\probw\bin\nsman.exe
    
    	And also make sure in AUTOEXEC.BAT you have:
    
    		set NSHOME=C:\PROBEW
    
    Tom Skabo
3085.2work but don'n workDEKVC::YOUNGCHANKIMTue Dec 19 1995 21:177
    PC has some mistake directory for probewatch.
    So,re-config and twice click in hubwatch,it's OK.
    But console problem is still remain.
    I can't setup ip address for probwatch because console is not work.
    Is this module out of order ? 
    
    yckim
3085.3Check your connection....FOUNDR::SKABOExpect Nothing U never disappointedWed Dec 20 1995 08:298
    Hello Yckim,
    
    Make sure that you have the console connected to the console port of
    the probe. (It is the bottom connector, as the other connector (the one
    by the LEDs) is a UTP connection). Use a std. DEC office connector cable 
    to a video terminal at 9600. 
    
    Tom