| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Setup Routing on DECswitch 900EF
I have copied the files, decswitch900ef-ip-v103.bin and mp-v103.bin.
I want to turn routing on this switch, as part of a DEChub900 I have.
When I try to do the upload, I get TFTP timeout... 1.) do I have the
right files? 2.) how to I enable TFTP?
I have an AlphaStation 250 that I've copied these files over the net...
I have setup an AUI > DELNI > DECswitch 'LAN' temporarily to
perform the above... is there something I'm missing...other than
documentation...smile.
/Mic
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3070.1 | Try this... | EDISTO::greene | Michael Greene | Tue Dec 19 1995 08:08 | 22 |
Re: .0
It sounds as if you have the right files for the 900EF. The upgrade process
usually goes pretty easily. You either:
- use HUBLOAD and treat the routing binary file as a firmware upgrade
- use a TFTP server and use to module setup menu option to upgrade
via TFTP
Once you have loaded the upgrade, then use the new module setup menu to
config an IP address. At this point then you need to use TELNET to talk to
the router cosole, and configure routing. You can either use a TELNET app
of choice or use HUBwatch, double click on the module and launch TELNET. You
cannot redirect the HUB setup port to 900EF/MP (or IP) and talk to the router
console.
Michael
PS In case you ever want to convert this or another 900EE/EF back to level 2
switching, you need connect to the router console, and use the
TALK 6/BOOT/LOAD REMOTE command to reload (from a TFTP server) the level 2
switching .BIN file
| |||||
| 3070.2 | EDISTO::greene | Michael Greene | Tue Dec 19 1995 10:10 | 8 | |
Re; .-1
One more note -- use HUBwatch V4.1.2 or later to work
with routing on DECswitches -- use no version before its time :-)
Michael
| |||||