[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3060.0. "How to assign 900MP's ports" by HGOM11::HUMPHREYTAN () Tue Dec 12 1995 04:29

    Hi,
    
    How can I allocate the port of DECswitch 900MP to face plate or
    backplane? I have upgraded an DECswitch 900EF to DECswitch 900MP.
    But when I want to assign a port to the backplane, the screen went to
    TELNET. Can I use HUBwatch to assign it? If It can, which version has
    such funtion and where is the kits placed, if it can't, can the ports
    of the router be assigned by command line.
    
    I'll be crazy.
    
    Regards,
    
    Humphrey
T.RTitleUserPersonal
Name		DateLines
3060.1telnet it isNETCAD::MILLBRANDTanswer mamTue Dec 12 1995 10:147
HUBwatch did what it's supposed to - launched you to the CLI 
that the current DECswitch900/MP requires for configuration.

You'll need the experts at IROCZ::COMMON_BROUTERS to point
you at a configuration guide and more info.

	Dotsie
3060.2Like Dotsie said...SLINK::HOODMy God, what have I done to my spleen?Tue Dec 12 1995 10:2211
Use the LAN Interconnect window, single-click the switch's icon, and
select the Configure button to set ports front or back.

Version 4.1 of HUBwatch does not support any other router functions,
except for port front-and-back configuration and the Telnet window.

Router configuration is included in V5.0, and router management is
a new clearVISN application also scheduled for next year.

Tom Hood
clearVISN Apps