[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3008.0. "PROBEwatch Host Report explanation please" by BERFS4::NORD () Mon Nov 27 1995 02:24

    
    
    Hi and good morning, good evening and so on,
    
    Theme is PROBEwatch V3.3, Report Generator, on PC, Windows V3.1.
    I need some explanation about the Host Report Outbound Utilization:
    
    I have installed a DECpacketprobe between a system (V6410, DEBNA,
    connected directly to a DECswitch 900 on 10BaseT-port) and a DECswitch,
    no other systems on these segment, system is only running LAVC on these
    interface.
    
    I created a report for outbound utilization and got a statistic with
    out- and in-packets and the top out-utilization is not from the system,
    which is the onliest connected on, top out is a system, which is a
    satellit of this cluster.
    
    Can you give me some advisory to this report, there is nothing
    explained in the short documentation I have ( ... use ...)
    
    And please look at note 2991, Ihave some trouble with the reports!
    
    Wolfgang Nord
    MCS Berlin, Germany
T.RTitleUserPersonal
Name		DateLines