[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3001.0. "FLASH.EXE file. Where ?" by VAXRIO::HENRIQUE () Thu Nov 23 1995 12:11

    Hi,
    
    Could someone please tell where i can find FLASH.EXE file ?
    
    Many thanks,
    
    
    Henrique
T.RTitleUserPersonal
Name		DateLines
3001.1KESAKOPRSSOS::PEYRACHEJean-Yves Peyrache Country Support Group FranceThu Nov 23 1995 13:568
      
    
     What is it ?
     where are you find this name ?
    
     it's a decbridge90 firmware image isnt it ?
    
     JYP
3001.2VAXRIO::HENRIQUEThu Nov 23 1995 14:4950
    I would like to load the flash rom firmware to a Decbridge 90
    that i use in my lab. To do this i need this file, write ?
    Or am i doing something wrong ?
    
    This is the article found on Tima.
    
    
    Loading Flash Rom Firmware to a DECbridge 90 / 90FL
    
    
    DESCRIPTION:
    
    Reset the DECbridge 90 to factory defaults by pressing the recessed
    button
    at the bottom part of the faceplate. Press the button and then power up
    the
    bridge simutaniously.
    
    To load Flash Rom Firmware to the DECbridge 90/90FL execute the
    following
    commands under NCP:
    
    NCP> SET NODE <address> NAME <name> HARDWARE ADDRESS -
    08-00-2B-xx-xx-xx SERVICE CIRCUIT <ethernet circuit> LOAD FILE -
    <dir:filename.ext>
    NCP> LOAD NODE <name>
    
        address = a DECnet address not currently in use, ie. 63.123
        name = a DECnet host name not currently in use, ie. DB90
        ethernet circuit = ie, SVA-0, BNA-0, etc...
        dir:filename.ext = filename of firmware, ie, FLASH.EXE
    
     
        Another article say that i could get this file at the location
        below but i didn'd find it.
    
    
         KALI::SYS$PUBLIC:[WGB.FIRMWARE.vvv]FLASH.EXE 
    
    
         Where is it ?
    
    
         Thanks,
    
    
         Henrique.
3001.3vuPRSSOS::PEYRACHEJean-Yves Peyrache Country Support Group FranceFri Nov 24 1995 05:509

  ok

  you can copy this file on evtv01::lat$kits:DEWGB_V39_FLOOD_DISABLE.TSK;1

  it's the same file

  JYP
3001.4THANKSVAXRIO::HENRIQUEFri Nov 24 1995 08:261