[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2948.0. "Hubwatch from Netview again" by CSC32::PITT () Thu Nov 02 1995 23:44

    
    
    We are trying to upgrade to version 4.1 of Polycenter Netview and
    Hubwatch on
    a DEC 2000/300 (Alpha AXP150).  There is a symbol name
    (HUBWATCH_LIBRARY) that
    needs to be pointed toward the path where Hubwatch is located
    (/usr/kits/HUBwatch).  We currently have the command to make this link
    setup
    in
    /etc/profile.  When we run Hubwatch from a DECterm window, everything
    works
    fine.  However, if we fire off Hubwatch from either the Session
    Manager, or
    from inside Netview, the Hubwatch initialization errors out complaining
    that
    the HUBWATCH_LIBRARY does not exist.  Where should we put this
    definition to
    make sure it will be passed on to all applications, no matter where
    they are
    started from.

T.R	Title	User	Personal Name	Date	Lines
2948.1		SLINK::HOOD	My God, what have I done to my spleen?	`Fri Nov 03 1995 11:22`	1
	Inserting the setenv command into the .cshrc file should do it.