| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Why does HUBLoader require a Portswitch 900FP to loaded "direct" as
opposed to "hub Managed", while DECrepeater 900TM and Portswitch 900TPs
can be loaded via the "hub managed" method.
This happened to a DECrepeater 900FP being upgraded from v1.1.0 to
v1.2.0.
-Charlie
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2947.1 | You could DIRECT upgrade a DETMM ?? | MSDOA::REED | John Reed @CBO = Network Services | Thu Nov 02 1995 23:17 | 17 |
I am surprised that you got the DECrepeater 900TM to upgrade through
the MAM. I just upgraded eight sites, from V4.0 DCF to the new v4.1.1,
and HUBloader (that came with v4.1.1) would NOT allow me to Hub-Manage
download upgrade any of the DECrepeater 900TM modules.
This was in a Chlorine factory, so I had to climb into my saftey gear,
and walk out to all of the sites with Repeaters, assign a temp IP address
to the individual module, walk back to the HUBloader PC in the network
administrators office, & perform a DIRECT upgrade. Then put my gas
mask back on, and walk to the remote buildings to delete the modules'
temporary IP address that I had assigned.
I would like to know how to directly upgrade the 900TM repeaters, for
future reference.
JR
| |||||
| 2947.2 | Note 2379 | NETCAD::FORINO | Fri Nov 03 1995 10:39 | 3 | |
I believe there was some discussion on this in note 2379.
John
| |||||
| 2947.3 | 900TP and CP | NCMAIL::SCHEID | Fri Nov 03 1995 11:36 | 8 | |
Correction ... i could do hub assisted on the 900TP & 900CP not the
900TM and 900FP
-Charlie
Ed B. early note clarifies this ...
| |||||