Conference netcad::hub_mgnt

2933.0. "Help with MUXserver 90 and DECMUX300" by ATHINA::KARVOUNIS_A (Who knows KWITERBELYAKIN ? ) Tue Oct 31 1995 08:40

    
    
    
    	Hello out there. I would like to ask if there is a null modem 
    	cable that I can connect from a MUXserver's 90 (50 pin connector)
    	to a DECMUX300 (50 pin cable).
    
   	 Do not ask why we are doing this, but , the DECMUX300 was in a remote
    	site with a modem. Now we came and put a DEChub 90 with a brouter
    	for communications the customer wanted to keep his DECMUX300 and a 
    	and a former coworker thought , I hope correctly, we can connect
   	these together. 
    	A rough sketch is as follows.
 50 pin connecto|------------------
    	________|__________       |
        |b |D  |M |       |       |50 pin connector to the DECMUX300 
        |r |E  |U |       | ______|_______
        |9 |C  |X |       | | DECMUX300  |
        |0 |r  |s |       | |____________|
        |  |e  |e |       |
        |  |a  |r |       |
        |  |p  |v |       |
        |-----------------|
            DEC hub 90
    
                      Thank you . Angelo...
                                           

Angelo
	I have always used the BC19Y. I was unable to get the pinout.

Steven Freke
LAN team
comms unit
UK CSC
[Posted by WWW Notes gateway]

    
    
    	Thanks Steven I will try it.
    
    
    
    		Angelo..