[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
|
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
2905.0. "Need help with HUBloader" by SNOFS1::KHOOJEANNIE (Humpty Dumpty was pushed) Thu Oct 26 1995 04:15
A customer here is having a strange problem with running HUBloader ...
He is running concurrent IPX and IP (LAN Workplace for DOS) stacks (ODI
driver), and loaded the HUBwatch disks (application only, no network).
HUBwatch runs fine, and he can manage his network components, and he
can also start HUBloader, which shows him the current versions etc ...
However, when he runs TFTP server followed by HUBloader to upgrade
firmware, HUBloader doesn't work anymore, and he can't see anything
through HUBloader until he stops TFTP server. Any ideas what could be
causing this?
All help will be much appreciated
Jeannie
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2905.1 | More details | NETCAD::FORINO | | Thu Oct 26 1995 12:38 | 3 |
| Can you provide more details about what happens when "HUBloader doesn't
work anymore"?
John
|
| 2905.2 | Cannot see module | SNOFS1::KHOOJEANNIE | Humpty Dumpty was pushed | Thu Oct 26 1995 22:22 | 5 |
| HUBloader no longer shows any information on the module (like firmware
version etc) and you can no longer ping the module. When you close
TFTP server you can ping the module again.
Jeannie
|
| 2905.3 | Is the Firmware Upgraded? | NETCAD::DJERBAKA | | Fri Oct 27 1995 12:23 | 11 |
| Are you saying that when you select 'LOAD', HUBloader does not enter a
POLLING state to report Load Status to you?
Is the TFTP server counting out block transfers at this time?
IS the Load successful?
Does the Firmware get upgraded?
What exactly is 'Not Working'?
Paul
|