[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2900.0. "MAM Yellow Temp Condition" by ALBANY::BARTLEY () Tue Oct 24 1995 13:13

     A customer's DEChub900 MAM display was stating that it had a
     yellow temp condition. It was warm in the closet. We went back to 
    look at the hub w/HUBwatch and there was no indication of the yellow
    temp condition for the hub. We looked under the view-environmental
    summary window and fans for all other components (power supplies,
    modules) were green. No information in that window to indicate the 
    status of the MAM.
    
    HUBwatch at X4.1.10 (Customer switching over to OpenVMS very soon.) 
    DEChub 900 MAM at V4.1.0
    
    Is this something missing from HUBwatch or is the yellow condition
    info available in another window?
    
    Thanks,
    
    Dave

T.R	Title	User	Personal Name	Date	Lines
2900.1	No temp sensing for hub itself	NETCAD::MILLBRANDT	answer mam	`Tue Oct 24 1995 13:50`	7
	Hi - What slot was the yellow temp pertaining to? What module was in the slot? I don't recall any chassis ambient temp sensors, just sensors within modules. Dotsie
2900.2	Warning, warning, danger	ALBANY::BARTLEY		`Tue Oct 24 1995 15:40`	8
	It didn't mention any slot. It said MAM Yellow Temp Warning. But now that you mention it, slot 4 had a DECrepeater900TM that won't show up on HUBwatch. It showed up as an unkwown module in the hub. That's why we went to the closet to begin with. We reset the module (re-inserted) and it came back ok. The MAM warning continued. Dave
2900.3		NETCAD::GERHARDT	Out of Control	`Tue Oct 24 1995 15:51`	6
	re .2 There is a temp sensor on the MAM. I put it there. drop by if you need help. keith
2900.4		NETCAD::MILLBRANDT	answer mam	`Wed Oct 25 1995 09:55`	1
	.0 - we will look into this.
2900.5	Why X4.1.10 ??	NETCAD::FORINO		`Wed Oct 25 1995 11:55`	7
	Just to confirm on the HUBwatch side there is a temp sensor for the MAM itself in the Environment Summary View and no where else. My real question is why the customer is running version X4.1.10???? This is field test software are should not be used now that shipping V4.1 kits are available. John
2900.6		ALBANY::BARTLEY		`Wed Oct 25 1995 16:21`	9
	Re: .5 We looked in the Environment Summary View (X4.1.10), there wasn't any temp sensor for the MAM. Let me know if this was added and is in the V4.1 kit. Still running X4.1.10 because of some backplane DS900EF/MP issues. Dave