[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2879.0. "HUBwatch, TFTP, Pathworks, Chameleon" by LEXSS1::HEBERTJ () Wed Oct 18 1995 15:30


Hi,


	I'm setting up HUBwatch V4.1 on my PC. I have Pathworks V5.1 with
DECnet and TCP/IP as well as Chameleon TCP/IP as 2 choices to boot my PC.
My understanding is that I can configure both of these to work with HUBwatch
so that I can boot with either TCP/IP suite and use HUBwatch.  Is this 
correct?

	A second question regarding TFTP.  If I do have the above TCP/IP
stacks configured to use with HUBwatch can I then use the respective TFTP
functionality with the HUBwatch loader module?

regards,


Jim
T.RTitleUserPersonal
Name		DateLines
2879.1TFTP Server should be okayNETCAD::FORINOWed Oct 18 1995 15:446
    The TFTP Server is WINSOCK compliant so it should work on other
    IP stacks.  I know it has been tested on a number of them but I
    don't remember if Chameleon was one.  Maybe someone from the field
    can confirm this?
    
    							John
2879.2You can use either PATHWORKS OR CHAMELEONNETCAD::WAGNERCOFFILWed Oct 18 1995 15:568
>>	I'm setting up HUBwatch V4.1 on my PC. I have Pathworks V5.1 with
>>DECnet and TCP/IP as well as Chameleon TCP/IP as 2 choices to boot my PC.
>>My understanding is that I can configure both of these to work with HUBwatch
>>so that I can boot with either TCP/IP suite and use HUBwatch.  Is this 
>>correct?
Yes.

Barb