[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2862.0. "HW v3.1 Term Svr Mgt?" by SWANDC::MAUTZ (Networks >= to DECnet) Fri Oct 13 1995 20:38

    My customer is trying to manage some DS900TMs with HUBwatch v3.1.
    When he sets the port speed with HUBwatch, the action never seems
    to take affect.  He winds up having to use NCP connect to the server
    and use server commands to set port speeds.
    
    The terminal servers are running Network Access Server software
    version 1.4 (BL91-32 R0 V5.1-0 LAT).
    
    Is this supposed to work?
    
    Thanks,
    
    Richard
T.RTitleUserPersonal
Name		DateLines
2862.1need to set "SNMP sets enabled"JULIET::WENGER_GESun Oct 15 1995 23:437
    Richard,
    
    By default only SNMP gets are enabled on the terminal server.  Your
    customer needs to set ther terminal server SNMP sets enabled.  This
    should allow him or her to make the changes from hubwatch.
    
    Georgia
2862.2SLINK::HOODMy God, what have I done to my spleen?Mon Oct 16 1995 13:005
Also, whenever you do an SNMP SET to any of the DECservers, you are
changing the "DEF" (non-volatile) characteristics, not the "SET" (current,
volatile) characteristics. So, you need to do a RESET PORT, logout port,
or reset server to make the things you change in HUBwatch appear on the
server.
2862.3Thank You!SWANDC::MAUTZNetworks >= to DECnetMon Oct 16 1995 19:243
    Thanks for the help!
    
    Richard