[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2854.0. "No NDIS Activity Detected" by SWAM2::JACOMB_SC (I know enough to be dangerous!!) Thu Oct 12 1995 16:37

    I have a customer that recently moved into a new building and purchased
    DEChub 900's with a variety of DECrepeaters. 
    
    When they Cold boot their PC's in the morning, they get the message 
    "No NDIS Activity Detected" and the protocol stack doesn't come up. 
    They can cold boot several times before it finally comes up. If they Warm 
    boot after the cold boot, everything usally comes up right away. They have 
    a variety of NIC's (3Com, DEC and others). 
    
    Some of the repeaters have security enabled, others don't. The repeaters 
    installed are 900TM, 900TP, 90TS & 90T-16. The customer says that the 
    problem doesn't occur during the afternoon. 
    
    Any suggestions?
    
    	-Scott
T.RTitleUserPersonal
Name		DateLines
2854.1Check with PATHWORKSNETCAD::WAGNERCOFFILThu Oct 12 1995 18:068
    
>>    When they Cold boot their PC's in the morning, they get the message 
>>    "No NDIS Activity Detected" and the protocol stack doesn't come up. 

Check in the PATHWORKS PWDOSWINV5 notesfile. (I could not find the error
message in the PW V5 for DOS and Windows Client Messages manual.)

Barb