[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2838.0. "Upgrade error message/Decpacketprobe 90." by VAXRIO::HENRIQUE () Fri Oct 06 1995 12:13

Hi,


I am trying to upgrade the Decpacketprobe 90 V1.0 to V2.5 and
i enter with the all information needed for the upgrade ( IP address,
Netmask,TFTP server address, R/W community ) and  then i select [10]
to upgrade software and the message below is received. The only thing
that I don't know what mean in the message is how to setup the subnet
values before using TFTP.


Agent is not configured correctly.
set the IP address,netmask and the subnet values before using TFTP.


       **** Decpacketprobe 90 Ethernet Probe Rev 1.0 ****

        
                       Executing from Flash


[1]  Change IP Address
[2]  Change Netmask
[3]  Change Default Gateway Address
[4]  Change Read Community
[5]  Change Write Community

[9]  Change TFTP Server Address
[10] Upgrade Software
[11] Enter Command-line Modem
[12] Reset Agent


                Enter your Response or Hit ESC to Abort


     Selection:



Anybody has an idea what is happening ?

Thanks in advanced.


Henrique
T.RTitleUserPersonal
Name		DateLines
2838.1reboot require..PRSSOS::PEYRACHEJean-Yves Peyrache Country Support Group FranceFri Oct 06 1995 14:498

 reboot/restart your probe between the setting of IP/SUB/TFTP and the download
 operation.

 i think, the Probe must be rebooted to accept the ip information

 JYP
2838.2check PacketProbe's addressNETCAD::MILLBRANDTanswer mamFri Oct 06 1995 14:529
I don't know the PacketProbe specifically, but maybe I can help.
You probably entered the IP address and subnet mask of the TFTP
server.  The "agent not configured correctly, set IP address,
subnet mask" message is referring to the PacketProbe itself.

Either the probe does not have an IP address, or the IP addresses
of the server and the PacketProbe are not in the same subnet.

	Dotsie
2838.3I've already reset agent.VAXRIO::HENRIQUEFri Oct 06 1995 16:3011
    I have already set the following:
    
    Probe IP  -          1.1.1.24
    Probe netmask -      255.0.0.0
    TFTP server (my PC)- 1.1.1.22
    
    And i had reset agent using menu iten [12].
     
    Any other hint ?
    
    Carlos
2838.4See note 2104.* fopr some hints...FOUNDR::SKABOExpect Nothing U never disappointedSun Oct 08 1995 11:322
    See note 2104.* for some hints....
2838.5All fields must be enteredPRSSOS::PEYRACHEJean-Yves Peyrache Country Support Group FranceMon Oct 09 1995 07:247
 Henrique
 
 add Gateway address  in the menu..


 JYP
2838.6I will try this.VAXRIO::HENRIQUEMon Oct 09 1995 21:474
    I am sorry. I was absent.
    I will try this tommorrow, JYP.
    
    Henrique
2838.7ok nowVAXRIO::HENRIQUETue Oct 10 1995 20:136
    After adding Gateway Address, everything worked fine. 
    Probe is now running software V2.6 
    
    Thanks everybody.