[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
|
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
2831.0. "Performance problem with V4.1.1" by CLPR01::PEYRACHE (Jean-Yves Peyrache Country Support Group France) Wed Oct 04 1995 12:55
hello,
my customer report to me a strange and reproductable problem after the upgrade
from V3.1 of Hubwatch for DEC-Unix to V4.1.1 , now HUBwatch works very slowly
when you work on a DEChub90 with DECagent90 V3.0.1 only.
i have already reproduced the symptom in my LAB using a DECHUB90 with
the following configuration:
slot 8 DECagent90
slot 7 Decbridge90
slot 6 Decrepeater90T
slot 5 Decserver90M
slot 4 Decrepeater90C
slot 3 Decrepeater90T
slot 1 Decrepeater90FA
the problem appears only on repeater stuff , if i select one port on
a specific repeater, the windows of this port appears after 3 seconds
but if i select the entire repeater the window of this repeater appears after
only after 50 seconds...
Same case on Hubwatch for windows (v4.1.1) works without this timing problem
(5 sec in all case).
thanks for any comments or pointers
jean-yves
| T.R | Title | User | Personal
Name | Date | Lines
|
|---|