| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
I have installed hubwatch v4.0.1 for a customer running on windows 95. All has gone OK, except that I can not get the TFTP server to run. The first set of error messages I got were the same as note 2404 i.e. Failed File Read Timeout. I then went into the TFTP server icon and started the server via the start button. This resulted in the BOOTP requests starting but not TFTP. When we tried to download the firmware again we got the same error as note 2571, i.e. SNMP Get Request Timeout. I am must be missing something obvious here. Do I have to configure a server using Config, Servers in the TFTP server menu. What I basically need to know is how do I get the TFTP server running. Thanks, Joe Ross
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2828.1 | Some things to check | NETCAD::FORINO | Wed Oct 04 1995 10:26 | 17 | |
First off (since lawyers are on a lot of people's minds today except
for disheartened Red Sox fans) HUBwatch doesn't officially support
Windows 95.
That said do you have the consolidated kit installed as well? If
so are all the environment variables described in the READ_ME_.TXT
set up properly. It may be that the TFTP Server is running fine
but the firmware files are not located where the variables say they
are.
Also, the TFTP Server display shows block counts as a device is
being loaded. Check if the block count every increments.
John
| |||||
| 2828.2 | SWETSC::ROSS | Fri Oct 06 1995 08:57 | 6 | ||
Thanks for the reply. I thought this might be the case with 95, so I installed it on 3.1 and got the same results. I then got them to stop and restart the TFTP server and now all is working OK. | |||||