[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2783.0. "Weird Hubwatch behaviour with Gigaswitch" by GIDDAY::STANISLAUS () Thu Sep 21 1995 01:59

	Trying to manage Gigaswitch using Hubwatch.

	Using Hubwatch (tried 4.0.1 and 4.1 same problem), I go into the filter
menu and select say DEFAULT FILTER. I get the matrix, but nothing at the bottom
such as FILL0, FILL1, OK, etc. 

Alphonse
T.RTitleUserPersonal
Name		DateLines
2783.1Which Platform?NETCAD::DRAGONThu Sep 21 1995 09:087
    
    Alphonse,
    
    	Was this with the Windows, OSF, or both kits?
    
    Regards,
    Bob
2783.2Combination Filter?NETCAD::DRAGONThu Sep 21 1995 12:1212
    
    Alphonse,
    
    	Also, if you select the Combination Filter then [OK], [Fill1], and
        [Fill0] buttons are not active. This is expected behavior, however
        the buttons themselves don't appear to be properly greyed out. Are
        you refereing to the Combination Filter, or is the problem
        something else? Is sound from your description that the buttons
        are not there at all. Is this the case?
    
    Regards,
    Bob
2783.3No Buttons at all GIDDAY::STANISLAUSThu Sep 21 1995 17:3815
    More Info:
    
    	DOS 6.x, Windows for WG 3.11.
    
    	Even when I click on DEFAULT FILTER, I get the filter matrix with
    INPUT PORTS along the row and OUTPUT PORTS along the column, but no
    buttons at the bottom.
    
    	The buttons are not there AT ALL. So there is no question of
    greyed-out. My screen finishes after the matrix.
    
    	My PC works for managing DEChub 900 and DEChub 900 modules - no
    problems at all.
                                                   
    Alphonse