| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2782.1 | may have a mismatch | NAC::FORREST | | Wed Sep 20 1995 18:48 | 8 |
| If the one on bhub is out of date, check
NAC:NIPG:[MANAGE.RMON]OSF_V33.PAK
We are doing some last minute debugging in the LMF code, because we
changed the product name from PROBEwatch for OSF to Digital Unix. So if
the one you copy doesn't work, check again on the next day or two.
jack
|
| 2782.2 | Thanks | DECPRG::PILAR | | Wed Sep 20 1995 20:03 | 6 |
| Jack,
thanks for quick reply. Licence is now O.K.
Jarry
|
| 2782.3 | | CRONIC::LEMONS | And we thank you for your support. | Tue Sep 26 1995 00:20 | 22 |
| Hi
I copied and installed the PAK in .1. I also copied and installed the
V3.3 kit. When I try to start PROBEwatch, I'm seeing:
idgosf.hlo.dec.com# source .netscout
idgosf.hlo.dec.com# bin/nsman
ERROR: This application will not run successfully unless it is used
on the processor(s) on which it is licensed. The licensed processor(s)
is the one(s) on which the product requiring the PROBEWATCH-FOR-OSF PAK
will execute. A PROBEWATCH-FOR-OSF PAK must be registered in the
License
Database and activated in the kernel cache before this application will
run. Refer to the installation guide for the product requiring the
PROBEWATCH-FOR-OSF PAK for license database PAK registration
instructions.
idgosf.hlo.dec.com#
Thoughts?
Thanks!
tl
|
| 2782.4 | | CRONIC::LEMONS | And we thank you for your support. | Thu Sep 28 1995 00:40 | 6 |
| Re .2, where did you get your 'ok' license from? VTX PAK does not have
a PROBEWATCH for Digital UNIX PAK, nor do the PAKs I've seen mentioned
here work with V3.3.
Thanks!
tl
|
| 2782.5 | pak @ NAC::NIPG:[MANAGE.RMON]OSF_V33.PAK | NETCAD::SKABO | Expect Nothing U never disappointed | Thu Sep 28 1995 10:26 | 5 |
| see note .2 from Jack Forrest, this is the correct PAK at:
NAC::NIPG:[MANAGE.RMON]OSF_V33.PAK
Tom Skabo - DEChub System's Test
|
| 2782.6 | | SSSAXP::LEMONS | And we thank you for your support. | Wed Oct 04 1995 00:22 | 85 |
| Sorry to whine, but has any in PROBEwatch Engineering actually tried
these steps:
1. I copied and added NAC::NIPG:[MANAGE.RMON]OSF_V33.PAK to my system:
idgosf.hlo.dec.com# lmf list full for PROBEWATCH-DIGITAL-UNIX
Product Name: PROBEWATCH-DIGITAL-UNIX
Producer: FRONTIER-SOF
Issuer: DEC
Authorization Number: AO-FP-CAPACITY-TESTPAK10
Number of units: 100
Version:
Product Release Date:
Key Termination Date: 15-JAN-1996
Availability Table Code: CONSTANT=100
Activity Table Code:
Key Options: ALPHA
Product Token:
Hardware-Id:
License status: active
Cancellation Date:
Revision Number: 0
Comment:
Cache Total Units: 100
Activity Charge: 0
idgosf.hlo.dec.com#
2. Then, I copied the kit noted in 2734.1, un-tar'd and installed it.
The installation went just dandy:
Configuring "PROBEwatch for Digital UNIX AXP V3.3" (PRBWTCH330)
Installation Configuration for
(PRBWTCH330) PROBEwatch for Digital UNIX AXP V3.3
Do you want to install the necessary files for launching
PROBEwatch from POLYCENTER Manager on Netview for
DEC OSF/1 AXP on this system [y/n]? y
THERE ARE NO MORE QUESTIONS TO ANSWER.
The installation will continue automatically from this point.
The installer is advised to read all notes printed during the
installation process for important information on the proper
operation of (PRBWTCH330) PROBEwatch for Digital UNIX AXP V3.3.
The installation and configuration of
PROBEwatch for Digital UNIX AXP V3.3 has completed.
Copyright (c) Digital Equipment Corporation, 1995 All Rights
Reserved.
Unpublished rights reserved under the copyright laws of the United
States.
idgosf.hlo.dec.com# ls -l
total 17
-rwxr-xr-x 1 root system 173 Aug 7 16:10 .netscout
-rw-r--r-- 1 root system 375 Aug 7 15:58 README
drwxr-xr-x 3 root system 512 Oct 3 23:13 X
drwxr-xr-x 2 root system 2048 Oct 3 23:13 bin
drwxr-xr-x 2 root system 512 Oct 3 23:13 binagent
drwxr-xr-x 4 root system 512 Oct 3 23:13 help
drwxr-xr-x 3 root system 512 Sep 30 00:43 man
drwxr-xr-x 2 root system 3584 Oct 3 23:13 samples
drwxr-xr-x 4 root system 512 Sep 30 00:44 ums
drwxr-xr-x 2 root system 3584 Oct 3 23:14 usr
idgosf.hlo.dec.com# source .netscout
idgosf.hlo.dec.com# bin/nsman
ERROR: This application will not run successfully unless it is used
on the processor(s) on which it is licensed. The licensed processor(s)
is the one(s) on which the product requiring the PROBEWATCH-FOR-OSF PAK
will execute. A PROBEWATCH-FOR-OSF PAK must be registered in the
License
Database and activated in the kernel cache before this application will
run. Refer to the installation guide for the product requiring the
PROBEWATCH-FOR-OSF PAK for license database PAK registration
instructions.
idgosf.hlo.dec.com#
So, it looks like I've copied the latest kit and the latest PAK. But
the kit is still expecting the old PAK.
What gives?
tl
|
| 2782.7 | | NETCAD::SKABO | Expect Nothing U never disappointed | Wed Oct 04 1995 09:47 | 14 |
| Hello Terry,
Sounds like a problem I had when I unpacked the TAR file....
In your working directory (Where you have your TAR file) and the
directory below, delete all other files except for the Probewatch
V3.3.1 tar kit. Then re-do the unpack of your TAR file and re-install.
This should work. as your have some files from the OSF (and UNIX)
kit laying around.
Good Luck,
Tom
|
| 2782.8 | | CRONIC::LEMONS | And we thank you for your support. | Wed Oct 04 1995 18:39 | 7 |
| Tom
I did this. I also tried a setld -d, followed by deleting all of the
files in /usr/kits/PROBEwatch. When I reinstall, PROBEwatch tried to
find a PROBEWATCH-FOR-OSF PAK.
tl
|
| 2782.9 | More notes from the field... | BSS::PROCTOR_R | He's BAAAAAAACKK!!!!! | Tue Oct 24 1995 18:02 | 9 |
| I tried the same scenario, V3331 kit, the new and improved license
(PROBEWATCH-DIGITAL-UNIX installed). It looks like the setld -v PRBWTCH331
IVP still barfs, yet running a /usr/kit/PROBEwatch/bin/dvadmin
seems to not complain about the absence of a license.
so it looks like the kit works OK, but the license (so far as the IVP
goes) is messed up.
Is this what they call job security?
|