[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2760.0. "PORTswitch 900CP sometimes fail to partition" by HGOVC::SIUKEUNGLEE () Fri Sep 15 1995 05:13

    Hello,
    
    Our customer found the following problems:
    
    1.    PORTswitch 900CP sometimes fail to partition opened ports.
    >
    As indicated by LEDs on the module's front panel and HubWatch 4.01,
    sometimes some opened ports (not terminated by loads) are not partitioned and
    having a state of "online".  Since the repeater fails to partition opened
    ports occassionally, it is worry that it will fail to filter out garbage
    from bad ports.  Note that most of the errors in our network are caused by
    bad  repeater ports and segments.
    
    Anyone have same porblem or suggestion are welcome.
    
    Thank!
    
    David Lee.
T.RTitleUserPersonal
Name		DateLines