| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Two DECstack config questions:
1.) Can I use ANY Ethernet means to connect to a stacked module? i.e.
could I STAR out from a repeater to the floor above/below to
connect? Some customers have 10-T wiring and may not care about
an in-closet stack but to run thinwire between floors...uugh.
So, can I use a 10-T to connect? (Yes, I understand repeater
rules apply etc..)
2.) What is the distance limit for the management bus? How far
can I go with a point-to-point connection?
Note that NEITHER of these are called out in the product install guide.
Regards,
j
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2741.1 | 185 meters for management bus | NETCAD::FORINO | Wed Sep 13 1995 12:38 | 5 | |
To answer question 2 the management bus limit is 185 meters. I do not
believe that there is an minimum/maximum cable length between two stack
modules within the 185 meters.
John
| |||||
| 2741.2 | 420 meters total length for the management channel! | STKHLM::KLARSSON | Krister Larsson @LNK | Wed Sep 20 1995 03:34 | 5 |
From the Digital MultiStack System Stacking Unit Installation and
Configuration manual;
"The total length of the management channel for the stack may not
exceed 420 meters."
| |||||
| 2741.3 | Where is that buried? | PTOJJD::DANZAK | Pittsburgher � | Mon Sep 25 1995 22:06 | 5 |
WHERE is that BURIED....and damn,it MUST be buried!!!!
Thanks,
j
^--who couold NOT find it.
| |||||