[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2718.0. "DS900-EF, Spanning Tree Diabled ?" by CGOOA::DANYLUK () Wed Sep 06 1995 15:07

    Question 1
    
    Can Spanning Tree be disabled on the DS900-EF, if not how can the
    followng be accomplished.
    
    Customer has two seperate Networks, each consisting of many bridges,
    theses two serperate Networks are bridged by a DS900-EF, the plan is to
    seperate these two networks in the future, but for now they need to
    pass a couple of protocals between the two networks. What the customer
    would like is to be able to pass some information but not spanning tree
    messages,  therefore if spanning tree changes take place in one
    network, they do not affect the other, any idea's. 
    
    
    						JD
    
    	HE tried one solution, he set up the following protocal filter on
    port 3 of the DS900-EF using hubwatch:
    
    		Filter		802.3 DSAP
    				ID 42
    
    	According to the information he gave me, hubwatch let him set up
    the filter but the bridge is still forwarding these packets, is this a
    feature.

T.R	Title	User	Personal Name	Date	Lines
2718.1	I'll try to answer over at note 2709 :-)	NETCAD::BATTERSBY		`Wed Sep 06 1995 15:42`	5
	Is this the same question you asked in note #2709?? If so, would it be possible to carry on the discussion over at that note topic? Just in the interest in keeping things orderly. Bob
2718.2	DSAP filtering	CGOOA::DANYLUK		`Thu Sep 07 1995 16:11`	8
	BOB, Sorry about the duplicaion, thanx for the spanning tree reply, is there any restrictions in filtering in regards to the note about the customer trying to filter out DSAP packets. JD
2718.3	Sending DECserver accounting data to HUBwatch	CRONIC::argyle.hlo.dec.com::lemons		`Thu Sep 07 1995 16:21`	32
	<<< TOOK::WORK$40:[NOTES$LIBRARY]TERMINAL_SERVERS.NOTE;1 >>> -< Terminal Servers >- =========================================================================== ====, Note: 2663.0 Sending accounting data to SNMP-capable network 0 replies CRONIC::LEMONS "And we thank you for your suppor 21 lines 4-SEP-1995 23:57 --------------------------------------------------------------------------- ----- I'd like to start a discussion of NAS' accounting features, and how best to record and manipulate this data. I've read Chapter 21 of the Network Access Server Management guide, and have DIR/TITLEd this conference and read those notes. I understand how to direct the accounting data to a DECserver port or to a service; I'd like to understand better how to retrieve this data via SNMP, instead. DEFINE ACCOUNTING THRESHOLD xxx "specifies at what point in the building of a log the accounting component sends out a threshold notification . . . in the form of [a SNMP trap]". I'm currently using HUBwatch, and will be evaluating MANAGEworks and NetView; all of these are SNMP capable. Can I use any of these tools to receive the threshold trap, empty to accounting log, and store/report on the accounting data? If this works, I wouldn't need to fiddle with harvestd, right? Thanks! tl
2718.4		SLINK::HOOD	Maine state bird: The black fly	`Thu Sep 07 1995 18:52`	3
	The DECserver accounting MIB is not supported by HUBwatch V4.1 Tom Hood