| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Can some one please look at the following output and tell
me what I'm doing wrong? I have a fe trying to upgrade
a FGl-4 module in a gigaswitch using NDUplus. We can't
get it to load the new firmware. Either UCX V3.2 is not
working or we didn't setup DEC NDUplus correctly. Any
help would be appreciated.
Phil Dickerson
$ download load /module=6 /pass="08002bb31380" 128.250.0.1-
$_mom$load:gs_fgl4_20.rsx /force=gigaswitch
(c) Digital Equipment Corporation. 1993. All Rights Reserved.
HOSTNAME: audv51.aud.alcatel.com
Server: 128.251.255.71
DECNDU: (TFTP) Target address = 128.250.0.1
setting Slot Number
[GIGAswitch] Getting TFTP Server IP address.
128.251.255.71
[GIGAswitch] Setting TFTP Server IP Address.
[GIGAswitch] Getting TFTP Server IP address.
128.251.255.71
[GIGAswitch] Getting firmware image file name.
MOM$LOAD:GS_FGL4_20.RSX
[GIGAswitch] Setting firmware image file name.
[GIGAswitch] Getting firmware image file name.
MOM$LOAD:GS_FGL4_20.RSX
[GIGAswitch] Triggering image file transfer.
[GIGAswitch] Starting TFTP Server
DECNDU: (TFTP) TIMEOUT on port.
[GIGAswitch] Polling for file transfer completion.
3 - IN_PROGRESS
3 - IN_PROGRESS
3 - IN_PROGRESS
3 - IN_PROGRESS
3 - IN_PROGRESS
3 - IN_PROGRESS
3 - IN_PROGRESS
[GIGAswitch] Getting slot number.
6
[GIGAswitch] Setting slot number.
[GIGAswitch] Getting slot number.
6
[GIGAswitch] Getting copyType.
1 - NONE
1 - NONE
[GIGAswitch] Triggering flash update.
[GIGAswitch] Polling for load completion.
1 - NONE
1 - NONE
1 - NONE
1 - NONE
1 - NONE
1 - NONE
1 - NONE
1 - NONE
$
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2689.1 | Can you ping the switch? | SCHOOL::RLEBLANC | Wed Aug 30 1995 09:13 | 45 | |
$ download load /module=6 /pass="08002bb31380" 128.250.0.1-
$_mom$load:gs_fgl4_20.rsx /force=gigaswitch
(c) Digital Equipment Corporation. 1993. All Rights Reserved.
HOSTNAME: audv51.aud.alcatel.com
Server: 128.251.255.71
DECNDU: (TFTP) Target address = 128.250.0.1
setting Slot Number
[GIGAswitch] Getting TFTP Server IP address.
128.251.255.71
[GIGAswitch] Setting TFTP Server IP Address.
[GIGAswitch] Getting TFTP Server IP address.
128.251.255.71
[GIGAswitch] Getting firmware image file name.
MOM$LOAD:GS_FGL4_20.RSX
[GIGAswitch] Setting firmware image file name.
[GIGAswitch] Getting firmware image file name.
MOM$LOAD:GS_FGL4_20.RSX
[GIGAswitch] Triggering image file transfer.
[GIGAswitch] Starting TFTP Server
>>>> DECNDU: (TFTP) TIMEOUT on port.
[GIGAswitch] Polling for file transfer completion.
Look no further than >>>>
UCX set up properly?
Are you able to ping the switch? If not check out notesfile
SCHOOL::GIGASWITCH note 265.1.
Once in a great while I've found DECndu+ gets hung up. If you type $STOP
and $EXIT in that process and retry it, it will work.
Cheers,
Rene'
| |||||
| 2689.2 | CSC32::D_PERRIN | Wed Aug 30 1995 13:39 | 2 | ||
Hi. I'm working with Phil on the problem above. Yes, we can
ping the switch.
| |||||
| 2689.3 | Pinging works... | CSC32::P_DICKERSON | Wed Aug 30 1995 15:27 | 7 | |
We can also do "download show device 128.250.0.1 /force=gigdescr
/module=6" all day long. We have no problem talking to this
switch. We just can't get it to load the firmware.
Phil D.
| |||||
| 2689.4 | NPSS::MDLYONS | Michael D. Lyons DTN 226-6943 | Wed Aug 30 1995 17:58 | 17 | |
...as we discussed over the telephone, I strongly suspect that the
problem is one of the following:
1) Confusion amongst multiple tftp servers (only one at a time!)
2) Resource problem on the VMS system preventing the tftp operation
3) ...some variation of the above
I know at various times you have had bootp and tftp services
enabled on UCX on the VMS system. Perhaps UCX has become confused
about the changes. Have you tried completely shutting down the network
and reinstalling both UCX and NDUplus from scratch? If you're using
the NDUplus/tftp *don't* enable it in UCX!
MDL
P.S. In general, NDUplus on VMS over UCX works fine for upgrades. I
have upgraded FGL-4s at least 50 times this way with nary a problem.
| |||||