| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
I just finished installing HubWatch V4.0.1 and upgrading all of the
900 modules in our hub. Now when I click on one of the modules shown on
our 900 backplane in hubwatch I receive the following error:
No agent specified for the slot MAC address-
please check log messages in the HubWatch
Message Box Window.
Could someone tell me what this error means?
Thanks.
Brent
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2633.1 | Lost an IP address? | NAC::FORREST | Fri Aug 11 1995 16:40 | 5 | |
I guess it means you need to enter an IP address somewhere. If this
is happening when you click on a DECrepeater, DECconcentrator, or
DECswitch, then I don't know what the problem is. But if the module is
a DECserver or DECbrouter, then those modules need their own IP address
assigned. This hasn't changed from earlier versions.
| |||||
| 2633.2 | NETCAD::DOODY | Michael Doody | Fri Aug 11 1995 17:52 | 8 | |
It sounds like a recently discovered problem with the MAM, which is
triggered when you have only the one IPS address set and the IPS
module goes asleep (such as when you upgraded it). You can reset the
MAM after the upgrades to clear the problem.
This is fixed in the next release of the MAM.
-Mike
| |||||
| 2633.3 | Reset worked | NETCAD::HILLER | Fri Aug 11 1995 18:34 | 4 | |
Thanks for the help. A reset did the trick.
Brent
| |||||