[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2601.0. "No agent specified for module" by COPCLU::PALMANN (Jan Palmann C/S Comms. Copenhagen) Thu Aug 03 1995 07:43

	About ones a day, Hubwatch for windows 4.0.1 say'es 
	"No agent specified for module "
	The errorlog say'es 
	" snmp request has no agent defined, invalid request"

	This happends when you "click on a module" in Hubwatch, to look 
	at it.   ( but only once in a while )

	The work arround: you have to reload, or to power down 
	the module, and then restart the PC running hubwatch.
	
	Also the DEChub 900 sometimes looses the setup. ( like to witch net
	the modules is connected  )

	The config:
	Hubwatch for windows 4.0.1
	It runs on a pentium 100 mhz PC
	
	DEChub 900 hwd 1.1.6
	5 x PEswitch 900 tx
	1 x DECcon. 900 mx
	1 x DECswitch 900 ef
	
				Any idears.?    Jan.
T.RTitleUserPersonal
Name		DateLines
2601.1may not be HW problemNETRIX::"[email protected]"Chip BoyleThu Aug 03 1995 11:5728
Jan,

>About ones a day, Hubwatch for windows 4.0.1 say'es 
>"No agent specified for module "
>The errorlog say'es  
>" snmp request has no agent defined, invalid request"

This may be a problem we've already fixed for the next minor release of the
DEChub 900 (MAM) f/w (4.X.0 (where X > 0)).  This bug is in 4.0.2 of the MAM
f/w.


The problem occurs when a module, acting as IP Server, goes to sleep, and
there are no other IPS/OBM addresses defined in the MAM.  A module can go
to sleep on an upgrade, a reset, or a crash.  This causes the MAM to lose 
management connectivity.

If you upgraded or reset your IPS module recently, and no other IP addresses 
are defined in MAM.  You only need to do a "Reset to Current Settings" on the
MAM.

Otherwise, you may want to check the error log of your IPS module.  Also, 
reset the MAM as described above.  Your module may have problems.

Hope this helps,
Chip

[Posted by WWW Notes gateway]
2601.2V4.1, when?LEMAN::PAIVAHawkeye - Network Support @GEOFri Aug 04 1995 04:3814
    Chip,
    
    >This may be a problem we've already fixed for the next minor release of
    >the DEChub 900 (MAM) f/w (4.X.0 (where X > 0)).  This bug is in 4.0.2 of
    >the MAM f/w.
    
    When will f/w 4.1.0  be available ?
    
    SARRAZ> dir netcad::proj$722:[onehub.release.firmware.v4_1.dos]
    %DIRECT-W-NOFILES, no files found
           
    Cheers,
    
    Pedro
2601.3NETCAD::DOODYMichael DoodyFri Aug 04 1995 11:3912
    We don't give dates here. Please ask the product manager.
    Also, he didn't say there would be a version v4.1.0, it is too early
    to predict the version number.
    
    
    >>SARRAZ> dir netcad::proj$722:[onehub.release.firmware.v4_1.dos]
    >>%DIRECT-W-NOFILES, no files found
    
    Note that the V4_1 here refers to the version of the consolidated kit, 
    which may be a different version number than any firmware contained within.
    
    -Mike