[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2520.0. "HW 3.1 and DEFPA is it supported" by JULIET::LEE_CA () Fri Jul 14 1995 15:13

    Has anyone configured a DEFPA PCI FDDI adapter to work with HW 3.1
    on a pc, I have had no succes. I loaded sch with the /ndis switch to not
    test ndis. The drivers all load I just can't seem to ping anybody but
    myself.
    
    	What version DEFPA driver and a copy of a working Protocol.ini file
    would be helpfull
    
    Config:  795WW  xlserver 590
    	     PCI slot 2, latency 88, bus master enabled,IRQ 5
             swxcr raid controller in EISA not being used
    
                                       Thanks in advance
    
    					Carey Lee

T.R	Title	User	Date	Lines
2520.1	Check the cable	NETCAD::WAGNERCOFFIL	`Fri Jul 14 1995 16:54`	3
	Did you check the cable connection? Barb
2520.2		JULIET::LEE_CA	`Mon Jul 17 1995 12:28`	3
	Reg. .1 Works fine with novell odi drivers. I tried to use novell drivers for IP but was not sure what the net.cfg file should look like.