| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
I have successfully installed PW V3.2 for windows on my Hinote
Notebook. The ethernet connection works. I can PING to my Probe.
But SNMP requests to the probe do not work (eg. remote login, domain
manager ).
Errormessage: Cannot open SNMP session with Agent "probe1"
It seems that IP UDP does not work ?
I considered already the following hints:
( in /probew/ipstack/pwtct.ini )
- specification of a default gateway
- UDPMAXSOCK = 20
Who can help ?
Karl
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2510.1 | is it a community string problem? | NAC::FORREST | Thu Jul 13 1995 18:09 | 4 | |
What happens when you click on the Test button for that probe?
Does public work for the community strings?
| |||||
| 2510.2 | MFRNW1::SCHUSTER | Karl Schuster @RTO OMS Munich Germany | Fri Jul 14 1995 03:05 | 13 | |
test button result:
GENERAL INFORMATION
IP Address: 16.185.0.226
Read Community: "public" Failed
Write Community: "public" Failed
With EDIT agent I can see that my probewatch is configured with
community public - and the agent is also configured with community
public. Probewatch from my OSF1-system works with the agent.
Karl
| |||||
| 2510.3 | sounds like SNMP not getting out of the PC | NAC::FORREST | Fri Jul 14 1995 12:32 | 5 | |
It sounds like you have an issue at the WINSOCK level. Do you happen to
have HUBwatch on this system? If so, is it working? If the answer is
no, then see Note 2008 for suggestions on No Response from Agent fixes.
PROBEwatch uses the same stack, so most of the suggestions apply.
| |||||