[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2505.0. "Should a DecSwitch lose settings if it loses power??" by CSC32::YOUNGWIRTH () Wed Jul 12 1995 14:45

    
    	Should a DecSwitch 900EF lose its configuration when it loses
    power??
    
    IE: Connections to Internal LANs and ports turned in???
    
    Sorry if this is in another note but I could not find anything.
    
    					Thank You
    					Mark Youngwirth

T.R Title User Personal
Name Date Lines

2505.1 Yes it will lose its configuration as likewise other modules NETCAD::BATTERSBY Wed Jul 12 1995 17:03 9

T.R	Title	User	Personal Name	Date	Lines
2505.1	Yes it will lose its configuration as likewise other modules	NETCAD::BATTERSBY		`Wed Jul 12 1995 17:03`	9
	Yes, it will if what you mean by losing its power is if it should happen to be removed from the hub it was in or if the flapper is accidently lifted on the DecSwitch instead of some other intended module. If you shut the whole hub off (for whatever reason), and then subsequently power it back on with all the modules (including the Decswitch), in their same slots then the configuration will be retained. Bob

    Yes, it will *if* what you mean by losing its power is if it should 
    happen to be removed from the hub it was in or if the flapper is
    accidently lifted on the DecSwitch instead of some other intended
    module. If you shut the whole hub off (for whatever reason), and
    then subsequently power it back on with all the modules (including
    the Decswitch), in their same slots then the configuration will
    be retained.
    
    Bob