[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2453.0. "When does a DECbridge 90 send an xid??" by TOPTEN::MEIGHAN () Fri Jun 30 1995 11:13

    When does the DECBRIDGE 90 poll with an xid packet? The customer said
    that they have not used any management tools yet with management
    enabled we see polls. Could these be caused by the TSM command test
    server? Do we send an xid if we are low on table space, near the
    workgroup size limit?

T.R	Title	User	Personal Name	Date	Lines
2453.1		NPSS::JOHNSON	Mike J., Network Products Support	`Fri Jun 30 1995 12:49`	5
	If I read your base note correctly, you have management enabled in the bridge. That is ALL it takes for the bridge to start sending XIDs. There is no need to be USING any tools. /mj