[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2442.0. "PEswitch 900tx and DE435." by VAXRIO::HENRIQUE () Wed Jun 28 1995 14:53

    Hi,
    
    A customer of mine is asking if is possible to use DE435 configured
    in full-duplex mode, connected to PEswitch 900tx .
    Is it possilble ? Does PEswitch 900tx supports full-duplex
    configuration on their front ports ?
    I didn't find this information in any place.
    Any information would be appreciated.
    Thanks.                      
    
    
    Henrique

T.R	Title	User	Date	Lines
2442.1	Full Duplex not supported	NETCAD::CARRAFIELLO	`Wed Jun 28 1995 17:17`	3
	The PEswitch 900TX does not support full duplex mode. Mike
2442.2	Thanks..	VAXRIO::HENRIQUE	`Wed Jun 28 1995 20:55`	3
	Thanks Mike. Henrique