| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Hi, I know there has been a previous note about HubWatch on Windows 95 and NT, but I haven't seen anyone ask about Probewatch and Win95. Has anyone any experience with this combination (WIN95, Probewatch 3.1) and could offer advice? The problem I have is that Probewatch appears to have installed OK into Win95, but when I run it the 1st screen comes up for a few seconds, or less, and then disappears. I know this combination is probably not yet supported, but if any one has any ideas I would be grateful. My PC is a DECpc 325SL with a XIRCOM Credit Card Adpater (Corporate Series). Cheers, Jim
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2412.1 | Check NSHOME enviroment variable | NETCAD::WAGNERCOFFIL | Thu Jun 22 1995 11:17 | 3 | |
Make sure that the NSHOME environment variable is set to the PROBEWATCH installation directory. Barb | |||||
| 2412.2 | NSHOME set and WIN95 upgraded - still no luck! | WOTVAX::pc0898.olo.dec.com::Hunt_JS | Relax ! Fly an Alpha? | Fri Jun 30 1995 04:30 | 23 |
Hi Barb, Thanks for the tip, but unfortunately that's not it as you can see below. Autoexec.bat ============ Rem Required for Teamlinks path = C:\WINDOWS;C:\WINDOWS\COMMAND;t:\tl Rem Required for Probewatch set NSHOME = C:\PROBEW mode con codepage prepare=((850) C:\WINDOWS\COMMAND\ega.cpi) mode con codepage select=850 keyb uk,,C:\WINDOWS\COMMAND\keyboard.sys When I entered the note I was on WIN95 build 347 which I thought might have a problem. I have now upgraded to WIN95 build 490, but it is still the same - the Probewatch screen flashes on the screen then exits. Any more ideas anyone? Thanks, Jim | |||||