[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2404.0. "Can't load the MAM Firmware with HUBloader" by CGOOA::CRICK () Tue Jun 20 1995 23:07

    I have installed HUBloader and HUBwatch 4.0 on my PC and have ran into
    some problems loading my DEChub 900 with the new MAM firmware.  The hub
    is currently at 3.1.0.  HUBloader finds the hub, displays the file to
    load, c:\FIRMWARE\DMHUB400.BIN, and the address of my PC correctly.  I start
    the load and the status messages indicate the following:
    
    TFTP: FILE TRANSFER STARTED
    
    ... DEChub900: D_timeout
    
    ...     LE_Into_PAD (lots of these)
    
    ...	    LE_into_PAD
    
    
    ...  Failed File Read Timeout
         Load Failed
    
    Do I have a bad load file?
    The file DMHUB400.BIN is 523,264 bytes in size.   Any thoughts on whats 
    wrong would be appreciated?

T.R	Title	User	Personal Name	Date	Lines
2404.1		NETCAD::GERHARDT	Out of Control	`Wed Jun 21 1995 00:39`	1
	is the TFTP server software running?
2404.2	Server wasn't running	CGOOA::CRICK		`Wed Jun 21 1995 12:28`	4
	The TFTP server wasn't running. I started it and the firmware load worked just fine. Thanks