Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
Moderator: | NETCAD::COLELLA DT |
Created: | Wed Nov 13 1991 |
Last Modified: | Fri Jun 06 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 4455 |
Total number of notes: | 16761 |
I need to configure DECswitch 900 EF with the new RouteAbout-software If I use IP-routing in DECswitch 900EF, can I configure IP-routing on the ports of DECswitch on a per port basis, bridge IP on some ports and route IP on other ports of same DECswitch regards ari
T.R | Title | User | Personal Name | Date | Lines |
---|---|---|---|---|---|
2391.1 | For now the answer is no | NETCAD::SOHA | Wed Jun 21 1995 11:53 | 15 | |
Hi Ari, Sorry about the delay in getting back to you, we're in the final stages of development for the DECswitch900EF Router. Unfortunately, the answer is no. Once you route a protocol, the protocol must be routed on all ports. This capability, which requires changes to the code base, is in our plans. This summer we will be culling down our list of features for the next release, so please let us know your wish/complaint list with priorities. Thanks, Mike Soha | |||||
2391.2 | TOOK::STETSON | Tue Jun 27 1995 19:40 | 13 | ||
- ip (or other protocol) routing is enabled globally for the box on a per protocol basis - packets are routed if the packet's protocol has been enabled for routing - packets are filtered at the MAC layer if you configure specific bridging filters - packets that are not routed or filtered are candidates for bridging, depending on the destination MAC address | |||||
2391.3 | another q | WELSWS::GREENR | Curiosity Killed The Cat | Mon Jul 17 1995 16:27 | 5 |
Can you say set up IP to be routed and then subsequently setup MAC level filters on the ports ? regs ross | |||||
2391.4 | Z28::COMMON_BROUTERS | NAC::FORREST | Thu Jul 20 1995 10:59 | 3 | |
There is a new conference now, specific to RouteAbout and DECswitch 900 Routing. It is at Z28::COMMON_BROUTERS or CAMERO::COMMON_BROUTERS. | |||||
2391.5 | IROCZ::COMMON_BROUTERS | TOOK::D_NELSON | Dave Nelson LKG1-3/A11 226-5358 | Fri Jul 21 1995 11:53 | 5 |
RE: .4 FYI: The nodes Z28 and CAMERO now form a cluster, with the cluster alias of IROCZ. |