[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2294.0. "DEFBA V1.4.4 reset problem" by TKTVFS::OHTSUKA_MU () Fri May 19 1995 06:43

 Hi !

 Please suggest me any solution for trouble .
 DECswitch 900EF reset 1 or 2 times per a day. 
       (Interval between 12 - 16 hours)

Is it releate "Notes 1903.*" ?
Regards


configuration:

                                          DEChub900 MS
             +---------------------------------------------+
   FDDI <---------------+                                  |
   FDDI	------> DEFBA  DEF6M  DETMM  DETMM                 |
             |  * * +   +        *     *                   |
             |  * * +---+        *     *    FDDI           |
             |  * *--------------*     *    ETHER2         |
             |  *----------------------*--  thinwire       |
             |                                             |
             +---------------------------------------------+

F/W version:
		DEChub900 MS	V3.1
		DEFBA		V1.4.4
		DEF6M		V2.8
		DETMM		V1.1

Feature:
		DETMMs are used all 32ports.
		"unknown DA received" count up continualy on DEFBA FDDI port.
		( By HUBwatch FDDI port counter)



 
Dump error log:

	
DECswitch 900EF - slot 1
==============================================================================

DECswitch 900EF, 6-Ethernet/FDDI Bridge, HW=v1/2,RO=v0.4,SW=v1.4.4  
SysUpTime                                 : 14:04:52   22 resets
SNMP Read/Write Community                 : public
SNMP Trap Addresses                       : 130.87.44.15
Status of Last Downline Upgrade           : TFTP Write
                                            08:43:54   53776 resets
                                            Transfer Complete.
In-Band Interface Hardware Address        : 08-00-2B-B0-B4-0F
In-Band Interface IP Address              : 130.87.149.12
In-Band Interface Default Gateway Address : Not Configured

==============================================================================


DECswitch 900EF - slot 1
==============================================================================

                                DUMP ERROR LOG
                            Current Reset Count: 22

==============================================================================


Entry #       = 2
Entry Status  = 0   [0=valid, 1=write_error, 2=invalid, 3=empty, 4=crc_error
Entry Id      = 10
Firmware Rev  = 1.4
Reset Count   = 21
Timestamp     =    0    0 FF79
Write Count   = 10
FRU Mask      = 0
Test ID       = DEAD
Error Data    = SR=2100 PC=03036486 Error Code=0000013B ProcCsr=7D6D
Registers     = D0=00000000 D1=00000000 D2=00000000 D3=00000000
                D4=00000000 D5=00000000 D6=00000000 D7=00000000
                A0=00000000 A1=00000000 A2=00000000 A3=00000000
                A4=00000000 A5=00000000 A6=00000000 A7=00000000
Dump another entry [Y]/N? 
Entry #       = 1
Entry Status  = 0   [0=valid, 1=write_error, 2=invalid, 3=empty, 4=crc_error
Entry Id      = 10
Firmware Rev  = 1.4
Reset Count   = 21
Timestamp     =    0    0 FF79
Write Count   = 10
FRU Mask      = 0
Test ID       = DEAD
Error Data    = SR=2100 PC=03036486 Error Code=0000013B ProcCsr=756D
Registers     = D0=0004B320 D1=00000000 D2=00000004 D3=B3400000
                D4=00000000 D5=0004B360 D6=00000000 D7=00000004
                A0=B1E00200 A1=00000000 A2=00050000 A3=00000000
                A4=00000000 A5=00000000 A6=00000000 A7=00000000
Dump another entry [Y]/N? 
Entry #       = 0
Entry Status  = 0   [0=valid, 1=write_error, 2=invalid, 3=empty, 4=crc_error
Entry Id      = 10
Firmware Rev  = 1.4
Reset Count   = 21
Timestamp     =    0    0 FF79
Write Count   = 10
FRU Mask      = 0
Test ID       = DEAD
Error Data    = SR=2100 PC=03036486 Error Code=0000013B ProcCsr=756D
Registers     = D0=00000004 D1=B1A00000 D2=00000000 D3=0004B1C0
                D4=00000000 D5=00000004 D6=B2000000 D7=00000000
                A0=0004B220 A1=00000000 A2=00000004 A3=B2400000
                A4=00000000 A5=0004B260 A6=00000000 A7=00000004
Dump another entry [Y]/N? 
Entry #       = 3
Entry Status  = 0   [0=valid, 1=write_error, 2=invalid, 3=empty, 4=crc_error
Entry Id      = 10
Firmware Rev  = 1.4
Reset Count   = 21
Timestamp     =    0    0 FF79
Write Count   = 9
FRU Mask      = 0
Test ID       = DEAD
Error Data    = SR=2100 PC=03036486 Error Code=0000013B ProcCsr=7D6D
Registers     = D0=00000000 D1=00000000 D2=00000000 D3=00000000
                D4=00000000 D5=00000000 D6=00000000 D7=00000000
                A0=00000000 A1=00000000 A2=00000000 A3=00000000
                A4=00000000 A5=00000004 A6=B0E00000 A7=00000000
Dump another entry [Y]/N? 
==============================================================================
T.RTitleUserPersonal
Name		DateLines
2294.1Yes your's looks very much like problem in #1903NETCAD::BATTERSBYFri May 19 1995 10:349
    <------- RE: -1 
    
    Yes, the information you have provided strongly suggests that
    your problem is very likely related to the discussion in notes
    1903.0-.3
    The problem mentioned in 1903 will be fixed I'm told in the next
    wave release due out within the next few weeks.
    
    Bob
2294.2summary require TKTVFS::OHTSUKA_MUMon May 22 1995 22:3911
 Hi Bob !

 Thanks for your reply.

 Will you summarize this problem ? Because I want have explanation for
 customer's daily reset problem.

 Forwarding database area overflow? Data buffer area problem? ..

 Mune