[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2276.0. "HW upgrades, 900TP and 900CP?" by EEMELI::RUOTILA () Mon May 15 1995 04:54

    
    Hi,
    
    In note 2272, there is a question about firmware upgrades required to
    DH900 modules to run HUBwatch for OSF 4.0.
    
    My questions is that are these module upgrades required also if I use
    HUBwatch for Windows 4.0?
    
    How about the use of coming 900TP AND 900CP? I need version 4.0 but do
    I have to upgrade my old backplane?
    
    Sorry if answered earilier?                           
    
    Regards, Risto
T.RTitleUserPersonal
Name		DateLines
2276.1NETCAD::DRAGONMon May 15 1995 08:2216
    
    Risto,
    
    >My questions is that are these module upgrades required also if
    >I use HUBwatch for Windows 4.0?
    
    Yes.
    
    >How about the use of coming 900TP AND 900CP? I need version 4.0 but
    >do I have to upgrade my old backplane?
    
    No. 
    
    Regards,
    Bob
2276.2NETCAD::DRAGONThu May 25 1995 16:5210
    
    Risto,
    
    	Just a point of clarification with regards to .1. By "backplane"
        if you are refering to hardware backplane then the answer is 
        still no. If by "backplane" you mean the MAM firmware then you 
        should upgrade to the latest using the documented procedure. 
    
    Regards,
    Bob