[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
|
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
2269.0. "900TM and 900GM troubles ...again.." by PRSSOS::PEYRACHE (Jean-Yves Peyrache Country Support Group France) Wed May 10 1995 15:41
Hello
another trouble with DECrepeater900TM and Decrepeater900GM (crashs)
of Course in this 2 cases all users hooked from these repeaters are
disconnected.
900GM crashs sometimes when you try to examine dump of errorlog
any comments will be welcome
Jean-Yves
-----------------------------------------------------------------------------
Enter selection : 3
DECrepeater 900TM - slot 7
==============================================================================
DECrepeater 900TM , 32 Port TP Ethernet Rptr SNMP, HW=v3,RO=v1,SW=V1.1.0
SysUpTime : 00:40:01 13 resets
SNMP Read/Write Community : public
SNMP Trap Addresses : 128.128.3.1
Status of Last Downline Upgrade : No Status
In-Band Interface Hardware Address : 08-00-2B-A6-0F-FF
In-Band Interface IP Address : 128.128.2.7
In-Band Interface Default Gateway Address : Not Configured
==============================================================================
DUMP ERROR LOG
Current Reset Count: 13
==============================================================================
Entry = 2
Time Stamp = 0 0
Reset Count = 12
Bus/Addr read exc. @7h, PC=24A7F4h
Dump another entry [Y]/N? n
*****************************900GM*********************************************
DEChub 900 MultiSwitch
==============================================================================
DEChub 900 MultiSwitch INSTALLATION MENU
[1] Reset with Factory Defaults
[2] Reset with Current Settings
[3] Show Current Settings
[4] Set SNMP Read/Write Community
[5] Add SNMP Trap Addresses
[6] Delete SNMP Trap Addresses
[7] Dump Error Log
[8] Set In-Band Interface IP Address
[9] Downline Upgrade
[10] Set Out-of-Band Interface IP Address
[11] Set Out-of-Band Interface Port Speed
[12] Start Event Display Mode
[13] Start Redirect Mode
==============================================================================
Enter selection : 13
Enter the slot number for redirection (1-8) : 5
Console redirected to 5: DECrepeater 900GM
Attempting connection [Ctrl/C to abort] ...
Connection Successful!
DECrepeater 900GM - slot 5
==============================================================================
DECrepeater 900GM INSTALLATION MENU
[1] Reset with Factory Defaults
[2] Reset with Current Settings
[3] Show Current Settings
[4] Set SNMP Read/Write Community
[5] Add SNMP Trap Addresses
[6] Delete SNMP Trap Addresses
[7] Dump Error Log
[8] Set In-Band Interface IP Address
[9] Set In-Band Interface Default Gateway Address
[10] Downline Upgrade
[Ctrl/C] Return to Hub Manager Menu
==============================================================================
Enter selection : 7
Module Not Responding! Connection closed!
Press Return for Main Menu ...
DEChub 900 MultiSwitch
==============================================================================
DEChub 900 MultiSwitch INSTALLATION MENU
[1] Reset with Factory Defaults
[2] Reset with Current Settings
[3] Show Current Settings
[4] Set SNMP Read/Write Community
[5] Add SNMP Trap Addresses
[6] Delete SNMP Trap Addresses
[7] Dump Error Log
[8] Set In-Band Interface IP Address
[9] Downline Upgrade
[10] Set Out-of-Band Interface IP Address
[11] Set Out-of-Band Interface Port Speed
[12] Start Event Display Mode
[13] Start Redirect Mode
Enter selection : 13
Enter the slot number for redirection (1-8) : 5
Console redirected to 5: DECrepeater 900GM
Attempting connection [Ctrl/C to abort] ...
Connection Successful!
DECrepeater 900GM - slot 5
==============================================================================
DECrepeater 900GM INSTALLATION MENU
[1] Reset with Factory Defaults
[2] Reset with Current Settings
[3] Show Current Settings
[4] Set SNMP Read/Write Community
[5] Add SNMP Trap Addresses
[6] Delete SNMP Trap Addresses
[7] Dump Error Log
[8] Set In-Band Interface IP Address
[9] Set In-Band Interface Default Gateway Address
[10] Downline Upgrade
[Ctrl/C] Return to Hub Manager Menu
==============================================================================
Enter selection : 3
DECrepeater 900GM - slot 5
==============================================================================
DECrepeater 900GM, 24 Port TP telco Rptr SNMP, HW=v3,RO=v01.05,SW=v1.1
SysUpTime : 00:00:08 43 resets
SNMP Read/Write Community : public
SNMP Trap Addresses : 128.128.3.1, 128.128.3.88
Status of Last Downline Upgrade : No Status
In-Band Interface Hardware Address : 08-00-2B-A6-80-C5
In-Band Interface IP Address : 128.128.2.25
In-Band Interface Default Gateway Address : Not Configured
==============================================================================
Press Return for Main Menu ...
DECrepeater 900GM - slot 5
==============================================================================
DECrepeater 900GM INSTALLATION MENU
[1] Reset with Factory Defaults
[2] Reset with Current Settings
[3] Show Current Settings
[4] Set SNMP Read/Write Community
[5] Add SNMP Trap Addresses
[6] Delete SNMP Trap Addresses
[7] Dump Error Log
[8] Set In-Band Interface IP Address
[9] Set In-Band Interface Default Gateway Address
[10] Downline Upgrade
[Ctrl/C] Return to Hub Manager Menu
==============================================================================
Enter selection : 7
DECrepeater 900GM - slot 5
==============================================================================
DUMP ERROR LOG
Current Reset Count: 43
==============================================================================
Entry = 1
Time Stamp = 0 0
Reset Count = 41
Fatal error: Line 329, File pcomErrLog.c
Dump another entry [Y]/N? Y
==============================================================================
No more Error Log entries.
Press Return for Main Menu ...
| T.R | Title | User | Personal
Name | Date | Lines
|
|---|