[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2239.0. "drv_init error 1 ifn 2" by NYOSS1::PLUNKETT () Mon May 01 1995 11:29

    Anybody have an idea of whats wrong when a packetprobe spits out:
    
    drv_init error 1 ifn 2
    
    The probe continually boots over and over again, after this message
    comes out.
    
    It started this wacky behavior after being moved.
    
    I'm assuming that something in the hardware is fried.  Is this a
    sound assumption?
    
    -Craig
T.RTitleUserPersonal
Name		DateLines
2239.1power supply gotchaNYOSS1::PLUNKETTMon May 01 1995 18:5212
    After some further digging, I found note 458 which describes the
    power supply "quirk".  It seems that I was bitten by this.  My
    customer wound up getting an AA power supply, after ordering a probe
    90 to go into a hub900.  This supply worked.  
    
    When I moved the probe, I used another AA supply, and got whacked. 
    If I go back to the original power supply, everything is cool.
    
    They subsequently ordered another probe, standalone this time, and
    got the BA power supply in the kit.
    
    -Craig