[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2226.0. "DECNDU+ V1.0e for VMS fails to upgrade a Decrepeater 900TM - TIMEOUT on port." by KERNEL::CHOPRAA () Thu Apr 27 1995 12:58

I have a customer who has successfully upgraded 8 decrepeater 900TM's with 
version 1.0e of DECNdu+ for VMS.  He cannot upgrade a further 5 using the same
firmware and the same version of NDU.

The command and results he is getting are below.  The timeout always occurs at the 
same place.  He is upgrading from 1.0g to 1.1.0.

Does any one have any ideas as to what the problem/solution is.

Thanks

Anil Chopra.

B.T.W.  The UCX TFTP server is not running.


$download load /force=pcommon 132.146.36.245 mom$load:detmm110.bin

[PCOMMON] Setting server IP address (pcomLoadIpHostAddr).
[PCOMMON] Getting Server IP Address
   132.146.19.4
[PCOMMON] Setting filename (pcomLoadFilename).
[PCOMMON] Get filename.
   MOM$LOAD:DETMM110.BIN
[PCOMMON] Setting AdminStatus/trigger (pcomLoadAdminStatus).
[PCOMMON] TFTP serve.
DECNDU: (TFTP) Blocks sent = 1

DECNDU: (TFTP)  TIMEOUT on port.
[PCOMMON] TFTP server completed.
[PCOMMON] Polling for sysDescr
[PCOMMON] Getting sysDescr
  DECrepeater 900TM 32 Port TP Ethernet Rptr SNMP, HW=v188,RO=v1,SW=v1.0G
T.RTitleUserPersonal
Name		DateLines