| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Do not have the environmental specs available for the DH900MS backplane and respective power supplies. I need to know what the power source requirements are for a DEChub 900 MS with three power supplies. i.e., how many amps do 3 power supplies pull at 120V? I need this to estimate how much power we need for a trade show we are doing locally. Any help would be appreciated. Thanks. Merlin
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2221.1 | AC input specs from DEChub 900 Multiswitch manual... | NETCAD::BATTERSBY | Wed Apr 26 1995 16:06 | 12 | |
The DEChub 900 Multiswitch owners manual specs out the AC input
as follows. These numbers probably assume the three pwr supplies.
(extracted from page A-4)
Table A-8 Electrical Specs
----------------------------
input voltage - 88 to 264 volts auto-ranging
line freq - 50 to 60 hz
input current - less than 10 amps
max heat diss - 730w
max input power - 1000VA
consumption
| |||||
| 2221.2 | 4.125 Amps? | ROMEOS::HARRIS_MA | Sales Executive II | Mon May 22 1995 18:46 | 6 |
Another way to guage is is EACH power supply delivers 165 Watts. 3
power supplies yields 495 watts. 495 watts at 120volts = 4.125Amps.
(Or there-abouts...)
Mark
| |||||