[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2143.0. "DECswitch 900EF & DEChub ONE with SMF PMD ?" by DECPRG::PRNET::Pilar () Mon Mar 27 1995 03:55

Hi all,

I have question concerning DECswitch 900EF and DEChub ONE with FDDI port 
(DEF1H). I found in 785.5 that FDDI port cannot be used but support will be 
included in FW release in Wave 3. We need to connect DECswitch 900EF to
SMF and solution with DEChub ONE seems to be the best.

So I'd like to ask if this feature is available today or in near future.

Thank you in advance

Jarry
T.RTitleUserPersonal
Name		DateLines
2143.1DECswitch 900EF & DEF1H will support SMF in next releaseNETCAD::BATTERSBYMon Mar 27 1995 10:025
    Yes SMF will be supported in the wave 3 release (like I had mentioned
    in note 785.5) for the DECswitch 900EF. So the near future will be when 
    the wave 3 release is done.
    
    Bob
2143.2PEswitch 900 and SMF and DEChub ONEDPDMAI::DAVIESMark, SCA Area Network ConsultantMon Apr 24 1995 23:5311
    Two additional questions:
    
    1. When is Wave 3 going to happen?
    
    2. Will Wave 3 also provide support for the PEswitch 900 to also use
       the DEF1H to make a connection to FDDI via SMF?
    
    Thanks,
    
    Mark