| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2042.1 | | KAOFS::S_HYNDMAN | Ride life's curves | Thu Feb 23 1995 09:21 | 11 |
|
I am not sure what your trying to describe on the first question.
Q2:
You need a cross over cable to connect a host directly to the
bridge port. They are straight through not crossed internally like a
repeater.
Scott
|
| 2042.2 | no cross-over for the PEswitch | SLINK::HOOD | This is my new personal name for Notes | Thu Feb 23 1995 09:44 | 2 |
| I don't think you need a crossover cable for the PEswitch 900TX. I think
those get wired like repeater ports.
|
| 2042.3 | PEswitch UTP ports have internal crossover | NETCAD::BATTERSBY | | Thu Feb 23 1995 09:49 | 6 |
| Tom is correct. The PEswitch 899TX is targeted for the desktop
usage whereas the DECswitch 900EE, and DECswitch 900EF are targeted
towards the department usage. Thus the PEswitch 900TX has internal
crossover on its UTP ports and the other two do not.
Bob
|
| 2042.4 | It can be made simpler | NETCAD::BATTERSBY | | Thu Feb 23 1995 09:59 | 15 |
| > If the port is 10 b 5, i think that i can't connect an Ethernet
> equipment to this port with only one drop cable. I have to use :
> - one drop cable,
> - one transceiver, -!
> - coaxial cable, --- or one DELNI
> - one transceiver -!
> - one drop cable.
If you are referring to the AUI ports on the switches, all you
should need is an AUI cable drop to a MAU (thinwire), or an AUI
cable to a DELNI local port. In each case the MAU BNC or the DELNI
global port is presumably connected to an existing building coax
LAN structure.
Bob
|
| 2042.5 | | SLINK::HOOD | This is my new personal name for Notes | Thu Feb 23 1995 12:58 | 4 |
| > Tom is correct. The PEswitch 899TX is targeted for the desktop
---
Bob, your Pentium needs to be upgraded.
|
| 2042.6 | I deserve that one....doing too many things at once :-) | NETCAD::BATTERSBY | | Thu Feb 23 1995 13:25 | 6 |
| >>Bob, your Pentium needs to be upgraded.
Uh no,..... my keyboard did a logical shift-right, & fingers stayed
positioned in same place.
Bob
|
| 2042.7 | another picture | PRSSOS::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Thu Feb 23 1995 13:50 | 16 |
| > If the port is 10 b 5, i think that i can't connect an Ethernet
> equipment to this port with only one drop cable. I have to use :
> - one drop cable,
> - one transceiver, -!
> - coaxial cable, --- or one DELNI
> - one transceiver -!
> - one drop cable.
you can Make another config also
Decswitch AUI =DECXM T----thinwire----T DECXM==AUI of stations
Terminator Terminator
jean-yves
|