[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2032.0. "DECserver 900tm as part of Hub picture?" by BRUNEL::PADDICK () Tue Feb 21 1995 05:46

Hello,

Can anyone tell me if the DECserver-900TM is manageable using the DEChub-
900 hub manager, or must it be managed as a standalone agent.

Even if it is only manageable as a standalone agent, is it possible to 
present it graphically as part of the hub-900 view.

I tried it and it didn't want to work. The customer has HUBwatch for 
windows version X3.1.6, and I'm not sure that this is a full kit, and not a 
test kit. 

Thank ewe,

Meic.

T.R	Title	User	Personal Name	Date	Lines
2032.1		SLINK::HOOD	This is my new personal name for Notes	`Tue Feb 21 1995 10:27`	25
	First of all, YOUR CUSTOMER HAS FIELD-TEST SOFTWARE! If it were my customer, I would change it into real software. As for the DECservers, ... Read the HUBwatch Installation and Configuration manual. There you will find, in convenient table format, how to manage DECserver 900TM's. But, sure, I'll be happy to type it here. Again. and Again. and Again. - Assign the DECserver an IP address. "def inter subnet mask nn.nn.nn.nn" "change inter address nn.nn.nn.nn" - Community in the DECserver must be PUBLIC (this requirement will change in a future version of NAS) - Enable SNMP in the DECserver "change snmp state enabled" "change snmp comm PUBLIC getnext enable" "change snmp comm PUBLIC set enable" "change snmp comm PUBLIC address <ANY or adr-of-pc>" "init delay 0" It can then be managed either as a standalone module or as a module within a hub. Tom Hood HUBwatch
2032.2	last command	CLPR01::PEYRACHE	Jean-Yves Peyrache Country Support Group France	`Tue Feb 21 1995 11:23`	7
	don't forget the gateway address if your decserver and your nms doesn't live in the same subnet Local>define inter gateway xxx.xxx.xxx.xxx jean-yves
2032.3	Thank ewe	BRUNEL::PADDICK		`Wed Feb 22 1995 06:14`	14
	Tom, Sorry to be so thick, but I think my problem may have been the community name. I did read the previous entries on that subject after my attemp, but wasn't sure if the restriction still existed. We did manage to manage DECserver90-TL's as part of a hub by specifying their agent info, and then adding them to a DEChub-90 graphic. I'm going to get the customer a proper copy of HUBwatch, and try again. Many thanks, Meic.