[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2013.0. "Blank display with OBM via slip" by CX3PST::NOTAMI::A_ANDERSON (CX03 2/H13 NSU/VAX MacGhille Aindrais) Tue Feb 14 1995 12:57

Hello All,

I have a customer with Hubwatch for windows V3.1 and firmware Rev 3.1.  In band 
management works ok.  But if he connects the PC to the OBM port and starts SLIP
all he gets under Hubwatch is a blank hub.  He can ping the OBM IP address
through SLIP.  

His hub has two Concentrator 900's, a DS90TM and a DECswitch 900EF.

Thanks,
Alan
T.RTitleUserPersonal
Name		DateLines
2013.1platform?PADNOM::PEYRACHEJean-Yves Peyrache Country Support Group FranceWed Feb 15 1995 12:348
     
     which PC (386/486) ?
     which speed of Com port  ?
    
    
     jean-yves
2013.2CX3PST::NOTAMI::A_ANDERSONCX03 2/H13 NSU/VAX MacGhille AindraisWed Mar 01 1995 13:035
DEC PC 386 25mhz and he has tried 38400 and 19200 baud.


Alan
2013.3Will this ever work?MAASUP::PORAMBOFri Aug 04 1995 10:308
    
    
    I have had the same problem with my DEC 25 Mhz 386 laptop. I realize
    that the recommended platform is a 386 33 Mhz or better. Is this a
    loosing battle trying to get this to work or will it work
    intermittently ( and just not a supported configuration for customers)?
    
    Bob