| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
We are replacing approx 30 DS300's at remote sites with DS900TM's. The customer would like to set up the ports on the new 900's eg enable multisessions, printer ports etc. Is there a way to do this thru Hubwatch? If not what is the easiest way to do this setup apart from connecting to each server and doing it that way. Any suggestions would be appreciated santokh
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2002.1 | Not quite. | SLINK::HOOD | This is my new personal name for Notes | Fri Feb 10 1995 12:47 | 8 |
You can do some, but not all, DECserver setup through HUBwatch, because the DECservers do not provide a comprehensive SNMP capability. There is a product called TSM (Terminal Server Manager?) that will do what you want. Check in the took::terminal_servers conference for details. Tom Hood HUBwatch | |||||
| 2002.2 | Hubwatch limited or TSM | PRSSOS::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Fri Feb 10 1995 12:56 | 24 |
santokh, Using Hubwatch you can modify _Max number of session _Flow control _Speed _Parity _Stop bit _type of port (remote local dymamic) i think another way in thru TSM (Terminal Server Manager) you can load script file including parameters needed for all Decservers Jean-yves | |||||
| 2002.3 | Thanks for info | VCOU04::BAINS | Mon Feb 13 1995 12:41 | 3 | |
Thanks for the inputs, we will be doing the setups thru TSM santokh | |||||