[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1981.0. "Clarkson Packet drivers" by CSC32::L_MORSE () Wed Feb 08 1995 12:14

    
    	Could some describe the role of Clarkson packet drivers for
    	Hubwatch for Windows 3.1, or a pointer to documentation ?
    	
    	A customer has a 486, DOS and windows 3.1 with a BOCA ethernet 
    	interface.  She was given a users guide that referenced the 
    	drivers briefly.
    
    	Larry Morse
T.RTitleUserPersonal
Name		DateLines
1981.1WFW not windowsCSC32::L_MORSEWed Feb 08 1995 13:045
    
    	The customer is running Windows for Workgroups not Windows
    	sorry.
    	
    	ALM
1981.2HUBwatch for Windows V3.1 READ_ME.TXTNETCAD::WAGNERCOFFILFri Feb 10 1995 11:1710
	Checkout the READ_ME.TXT for HUBwatch for Windows V3.1. Refer to
	the following sections:
	1- Using the Other "Type of Network Card" Option
	2- Windows for Workgroup Support for HUBwatch for Windows with
	   Network Option
	3- Tips to Get Your DEC Etherwork III Network Adapter Card to Work
	   With WFW (Although this section is specific to EWRK3 NIC card,
	   the general tips are for any NIC card and driver.)
	
Barb
1981.3HUBwatch PW IP stack no Packet driver supportNETCAD::WAGNERCOFFILFri Feb 10 1995 11:559
	Now that I reread your note...

	The Packet driver is the driver for your Network Interface Card(NIC).

	You WILL NOT be able to use the TCP/IP(PATHWORKS for DOS and 
	WINDOWS V5.1) stack that comes with HUBwatch. There is no support 
	for Packet drivers only for NDIS, ODI, and SLIP.
		
Barb