[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1963.0. "Telnet sesion for DECserver please" by ONOIS1::GAIRNS () Fri Feb 03 1995 04:39

    As HUBwatch offers only minimum configuration possibilities for a
    DECserver (only 4 of the several dozen parameters for a port) it would
    be VERY NICE for the DECserver window to also offer a TELNET icon
    that would allow the user to configure the DECserver as he would a
    Brouter. 
    All new DECservers (from 90TL onwards) offer a Telnet console port.
    
    Comments please?
    
    Thanks
    
    Ian Gairns

T.R Title User Personal
Name Date Lines

1963.1 It is planned. SLINK::HOOD I'd rather be at the Penobscot Fri Feb 03 1995 10:37 14

T.R	Title	User	Personal Name	Date	Lines
1963.1	It is planned.	SLINK::HOOD	I'd rather be at the Penobscot	`Fri Feb 03 1995 10:37`	14
	> As HUBwatch offers only minimum configuration possibilities for a > DECserver (only 4 of the several dozen parameters for a port) it would The DECservers only support limited control using SNMP, so that's what HUBwatch provides. > be VERY NICE for the DECserver window to also offer a TELNET icon It's planned. It might be in V4.0, along with added support for the DECserver 900GM. Tom Hood HUBwatch

>    As HUBwatch offers only minimum configuration possibilities for a
>    DECserver (only 4 of the several dozen parameters for a port) it would

The DECservers only support limited control using SNMP, so that's what
HUBwatch provides.

>    be VERY NICE for the DECserver window to also offer a TELNET icon

It's planned.  It might be in V4.0, along with added support for the 
DECserver 900GM.


Tom Hood
HUBwatch