[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1947.0. "Hubwatch V3.1 VMS with TGV Multinet V3.3 Rev B" by GIDDAY::LEUNG () Tue Jan 31 1995 01:22

    HubWatch V3.1 VMS
    TGV Multinet V3.3 Rev B
    
    Customer had UCX V3.0 before and was running fine.
    They removed UCX (UCX$CLEANUP.COM) and installed Multinet.
    Re-install Hubwatch V3.1 for VMS.
    
    When hubwatch$startup.com is run at boot time, it displays that
    it is running with TGV Multinet.
    
    However, now when trying to access a DECHub 900 (firmware V3.1), it
    timesout with no response from agent. Customer can ping to the Hub900.
    
    Are there any flags that can be enabled to find out what is happening?
    
    Thanks for all replies,
    
    Dennis

T.R Title User Personal
Name Date Lines

1947.1 MultiNet 3.3 Rev B SLINK::HOOD I'd rather be at the Penobscot Tue Jan 31 1995 11:58 11

T.R	Title	User	Personal Name	Date	Lines
1947.1	MultiNet 3.3 Rev B	SLINK::HOOD	I'd rather be at the Penobscot	`Tue Jan 31 1995 11:58`	11
	I seem to remember that is something "funny" in MultiNet V3.3 Rev B. HUBwatch will not work with TGV MultiNet V3.3 Rev B. I think you can contact Multinet for a patch. HUBwatch will definitely run with v3.3 Rev A. Tom Hood HUBwatch

I seem to remember that is something "funny" in MultiNet V3.3 Rev B.
HUBwatch will not work with TGV MultiNet V3.3 Rev B.

I think you can contact Multinet for a patch.  

HUBwatch will definitely run with v3.3 Rev A.


Tom Hood
HUBwatch