[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1771.0. "demon pb with probewatch 3.1 for Windows" by LYOISA::CROZET () Fri Dec 09 1994 04:36

    Hello,
    
    I have an installation problem with probewatch 3.1 on windows.
    Everything was OK during the installation, but now when i run
    probewatch i get differents messages of this kind:
    
    		Launching error :Trap demon
    		Could not run (file not found)
    
    Same for Configuration,Launching.
    
    NSHOME is defined and I can ping everything i want on my IP network
    
    				Any idea

T.R Title User Personal
Name Date Lines

1771.1 look for these files NAC::FORREST Fri Dec 09 1994 17:22 7

T.R	Title	User	Personal Name	Date	Lines
1771.1	look for these files	NAC::FORREST		`Fri Dec 09 1994 17:22`	7
	Do you have the following files in your NSHOME\bin directory: dvconfd.exe, dvlogd.exe, dvtrapd.exe ? If they are there, and NSHOME is still being defined in your AUTOEXEC file to point to the upper level PROBEwatch directory, then I don't have a clue.

    Do you have the following files in your NSHOME\bin directory:
    
    	dvconfd.exe, dvlogd.exe,  dvtrapd.exe ?
    
    If they are there, and NSHOME is still being defined in your AUTOEXEC 
    file to point to the upper level PROBEwatch directory, then I don't 
    have a clue.